Want to learn to drive a manual car?
Looking for a manual car driving lessons?
If your answer is yes then you are on the right page because in the given article you will get to know about:
- A brief overview of manual cars and related driving lessons
- Working principles of gears of manual cars.
- How to start a manual car.
SOME INFORMATION ABOUT MANUAL car DRIVING LESSONS:
Manual cars are easy to drive and easy to learn since they are less complex than automatic cars and also there are fewer chances of accidents. The only item that generally needs repair is a clutch; there is the use of gear or engine oil in manual cars. In manual cars there is a better fuel economy, in these cars breaking is easier without the torque converter which is found in automatic vehicles. Manual cars are also cheaper than automatic cars.
GEARS OF MANUAL CARS:
Manual transmissions typically use one reverse gear and four to six forward gear ratios. In most types of manual cars, there are 5 gears; at this time we are going to discuss 5 gears of manual cars.
- 1st speed: low
- 2nd speed: 2nd
- 3rd speed: 3rd
- 4th speed: top
- 5th speed: overdrive
- R: reverse
- N: neutral
Depending on the type of manual car like sometimes the reverse gear is under the 5th gear and sometime it may be on the left side of second gear or the left side of 1st gear. Now we are going to explain driving lessons for the role of each gear below;
1st GEAR (LOW):
This is the gear used when starting from a stopped state, 1st gear is the most powerful gear. It is also the gear with the least speed; we should use it within the range of 0 to 20km/h. 1st gear is also used to park a car on a slope.
2nd GEAR:
After starting with 1st gear on ordinary roads, it is used to increase the vehicle speed. Even’ you can use this 2nd gear when starting off on a slippery road or on a snowy road.
3rd GEAR:
This 3rd gear is used to increase the speed further than 2nd gear, use this gear within the speed range of 20 to 50km/h. 3rd gear is used when running in town and curves. This gear is also used for engine brakes on a gentle downhill.
4th Gear:
4th gear is used to raise the speed further than 3rd gear, this gear is used on a large road like a national highway, use it within the speed range of 30 to 60km/h.
5th GEAR (OVERDRIVE):
5TH gear is used for high speed or running such as on highways, this 5th gear is also known as an overdrive gear. This gear is used in the speed range of 60km/h or more.
R (reverse):
This gear is used to back or reverse the car.
N (neutral):
There is no gear selected, in the neutral state be sure to apply the parking brake when stopping because in this state the car will roll on even a slight hill.
Steps to start manual cars:
If you want to learn to drive a manual car then follow these steps when you are ought to start a manual car:
- The first step is to press the clutch pedal down to the floor with your left foot.
- Step on the brake with your right foot.
- Release the emergency brake.
- Then confirm that the gear shifter is in the neutral position
- Twist the key in the ignition
Now the car will startup.
CONCLUSION:
Manual cars are less complex than automatics and easier to maintain. These cars need to concentrate on gears. Now a day’s cars are a need for every individual and everyone should learn to drive both manual and automatic cars. There are many driving training institutions, all over the world these institutions teach you driving lessons & makes you a perfect